STATOR & FLYWHEEL KIT SUZ DL1000 02-09 & 12 (RMS900-108092)

Brand new aftermarket Stator and Flywheel kit.

• Direct replacement for the original unit.
• Plug-and-play, direct fit and easy installation.
• High-grade lamination materials.
• High-grade copper windings, resistant to temperatures up to 200°C.
• Pickup/pulsar coil included.
• Connector included.
• Rubber grommet included.
• All products are tested before shipping.

Product images are accurate. If in doubt, compare the items with your original parts.

Before installing the new stator and flywheel:

• Check the AC output of the stator.
• Replace any burned or corroded connectors on the stator and regulator/rectifier.
• Check and repair any melted wiring.
• Apply high-temperature dielectric grease to all connectors.

The stator may have a different wire colour code from the original part. All wires are installed in the correct order; do not change the wiring configuration. This stator is designed as a direct plug-in replacement.

Always use thread-locking compound when securing the stator. If the stator includes a pickup coil, check the air gap during installation. Set it as close as possible, but no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing. Ensure proper installation by a qualified technician to avoid malfunction.

Stator Dimensions:

• Interior diameter: 54 mm.
• Exterior diameter: 119 mm.
• Thickness: 25 mm.
• Stator-to-grommet wire length: 160 mm.
• Grommet-to-plug wire length: 430 mm.
• Pickup coil wire-to-grommet length: 150 mm.

Other Specifications:

• Number of wires: 5.
• Number of plugs: 2.
• Number of pins: 5.
• Number of poles: 18.
• Alternator resistance (black to black): 0.6 ohms ±20%.
• Pickup coil resistance (blue to green): 193 ohms ±20%.

Flywheel Dimensions:

• Inner diameter: 120 mm.
• Outer diameter: 149 mm.
• Total height: 65 mm.
• Inside height: 46 mm.
• Centre housing depth: 35 mm.
• Centre housing widest diameter: 35 mm.
• Centre housing thickness: 26 mm.